We apply both low and high build Intumescent PFP systems. We are certified to apply Chartek, Jotachar & Pittchar – and can look at certification for other manufacturers’ products if specified.

We also carry out the preparation work (shotblast & application of approved primer) for Cementicious PFP application, as well as the application of approved finish coats to Cementicious PFP.

The protective systems based on coatings are normally sprayed onto the surface following mixing of the required components. A reinforcing glass fibre scrim or steel wire gauze is applied to prevent cracking and peeling of the coating under fire conditions and to provide additional strength to resist the impact of high-pressure water jets. The fire protective coating is further protected by a weather protective top layer. The fire-resistant performance of the coatings is dependent on the thickness of the coating, as specified

We have carried out works for clients such as Conocophillips Propane Project, GBL4 Project Europe & PCI Plant SSI to new a few.